1 -------------
Reading | ################################################## | 100% 0.14s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0200
         0x7d != 0x66
avrdude: verification error; content mismatch

avrdude done.  Thank you.

2 ----------


Sketch uses 1,068 bytes (3%) of program storage space. Maximum is 32,256 bytes.
Global variables use 11 bytes (0%) of dynamic memory, leaving 2,037 bytes for local variables. Maximum is 2,048 bytes.
/usr/local/software/arduino-1.6.5/hardware/tools/avr/bin/avrdude -C/usr/local/software/arduino-1.6.5/hardware/tools/avr/etc/avrdude.conf -v -patmega328p -carduino -P/dev/ttyUSB0 -b115200 -D -Uflash:w:/tmp/build8811690481861229818.tmp/Blink.cpp.hex:i

avrdude: Version 6.0.1, compiled on Apr 14 2015 at 19:04:16
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "/usr/local/software/arduino-1.6.5/hardware/tools/avr/etc/avrdude.conf"
         User configuration file is "/home/eaman/.avrduderc"

         Using Port                    : /dev/ttyUSB0
         Using Programmer              : arduino
         Overriding Baud Rate          : 115200
         AVR Part                      : ATmega328P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    20     4    0 no       1024    4      0  3600  3600 0xff 0xff
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500  4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : Arduino
         Description     : Arduino
         Hardware Version: 3
         Firmware Version: 4.4
         Vtarget         : 0.3 V
         Varef           : 0.3 V
         Oscillator      : 28.800 kHz
         SCK period      : 3.3 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f
avrdude: reading input file "/tmp/build8811690481861229818.tmp/Blink.cpp.hex"
avrdude: writing flash (1068 bytes):

Writing | ################################################## | 100% 0.18s

avrdude: 1068 bytes of flash written
avrdude: verifying flash memory against /tmp/build8811690481861229818.tmp/Blink.cpp.hex:
avrdude: load data flash data from input file /tmp/build8811690481861229818.tmp/Blink.cpp.hex:
avrdude: input file /tmp/build8811690481861229818.tmp/Blink.cpp.hex contains 1068 bytes
avrdude: reading on-chip flash data:

Reading | #####avrdude: stk500_recv(): programmer is not responding
Problem uploading to board.

------