Materials
======

* Vertical body is multistrato betulla / birch plywood 2.5cm thick
* Sides are abete / pine planks 2.3cm thick (comes in 10cm x 100cm pieces)
* Ornament sides thickness is not important, it's set to 3mm

The original Fusion 360 file has parameters to change those, yet it may be simpler just to modify the "heel and point" height of the side pieces and the inset of the vertical body.

Take care of the final widht of the neck before gluing the 3 pieces.

This is supposed to be joined with dowels (covered by the ornament sides) or just plain skrews (4 per side) with ~18mm washers.
The contact points between the bass headset and the hanger sides need to be filed (points of contact are variable, yet you may look at the very left side in the Lightburn project with the supposed dimensions ones in red).